Shield Sealer / Undercoater

SHIELD is a water-based, nonmetal interlock, polymer sealer for resilient tile and porous hard surface flooring, designed to be used as an undercoat for floor finishes. After stripping all floor finish and sealer from the floor, rinse with clear water and allow to thoroughly dry. Apply one coat and allow to dry 45 minutes. On old, or very porous floors, a second coat may be needed. Apply two or more coats of floor finish over undercoat. This superb product seals the pores of the floor, protecting it from harsh solutions and soils while it levels the floor surface. It provides the perfect surface and adhesive qualities for the application of floor finish. Improves the gloss and wear of the finish. The floor may be scrubbed to remove the old finish without removing the sealer, protecting the floor from harsh detergents. Yet, it can be removed with stripper and pad. A must in high speed floor care systems. HMIS Codes: H-1, F-0, R-0, P-A. Available in gallons (4/cs), 55 gallon drums, 35 gallon drums, 20 gallon drums, 5 or 6 gallon pails. Private label only.

707 Shield