Aqua Seal Clear Concrete Sealer

AQUA SEAL is designed for inside use on concrete, brick and other porous, hard surfaces. Use to seal new and old concrete when resistance to solvents is needed. Also for use on terrazzo, exposed aggregate or any other masonry surface. Clean the area to be sealed by scrubbing with concrete cleaner and flush with plenty of clear water. Allow floor to dry thoroughly. This will be indicated by a white color. Apply 1–2 coats and allow to dry 30 minutes between coats. On old, or very porous floors, additional coats may be needed to develop higher gloss. For old concrete, be sure all grease and oil are removed. Scrubbing the floor twice or more may be necessary before applying. Dries after one hour. This unusual product is one of a kind. It is nonflammable, odorless, easy to use and economical, yet resists solvents such as gasoline. Possesses all the features of a urethane except that it can be applied without odor problems in close areas and to new concrete. Seals the floor and protects it from spills and soils. It fills the pores to give a uniform low gloss appearance and binds the components of the floor together, making it stronge. Eliminates dusting. HMIS Codes: H-0, F-0, R-0, P-A. Available in gallons (4/cs), 55 gallon drums, 35 gallon drums, 20 gallon drums, 5 or 6 gallon pails. Gallons are private label only.

702 Aqua Seal